User manual

CN8000 User Manual
30
(Continued from previous page.)
6. On the RADIUS server, set the access rights for each user according to the
information in the table, below:
Note: 1. The characters are not case sensitive. Capitals or lower case work
equally well.
2. Characters are comma delimited.
RADIUS Examples
RADIUS Server access rights examples are given in the table, below:
CC Management Settings
To allow authorization for the CN8000 through a CC (Control Center) server,
check Enable and fill in the CC Server’s IP address and the port that it listens
on in the appropriate fields.
Character Meaning
C Grants the user administrator privileges, allowing the user to configure the
system.
W Allows the user to access the system via the Windows Client program.
J Allows the user to access the system via the Java applet.
P Allows the user to Power On/Off, Reset devices via an attached PN0108.
L Allows the user to access log information via the user's browser.
V Limits the user's access to only viewing the video display.
S Allows the user to use the Virtual Media function.
String Meaning
c,w,p User has administrator privileges; user can access the system via the
Windows Client; user can access the attached PN0108
w,j,l User can access the system via the Windows Client; user can access the
system via the Java Applet; user can access log information via the user's
browser.
cn8000.book Page 30 Tuesday, July 1, 2008 4:18 PM