User manual

4. Administration
29
ANMS
The Advanced Network Management Settings dialog box allows you to set up
login authentication and authorization management from a external sources. It
is divided into three main panels, as described, below:
RADIUS Settings
To allow authentication and authorization for the CN8000 through a RADIUS
server, do the following:
1. Check Enable.
2. Fill in the IP addresses and port numbers for the Primary and Alternate
RADIUS servers.
3. In the Timeout field, set the time in seconds that the CN8000 waits for a
RADIUS server reply before it times out.
4. In the Retries field, set the number of allowed RADIUS retries.
5. In the Shared Secret field, key in the character string that you want to use
for authentication between the CN8000 and the RADIUS Server.
(Continues on next page.)
cn8000.book Page 29 Tuesday, July 1, 2008 4:18 PM