User manual

CN8000 User Manual
28
To delete a filter, select it and click Remove.
To modify a filter, select it and click Edit. The Edit dialog box is similar to the
Add dialog box. When it comes up, simply delete the old address and replace
it with the new one.
MAC Filtering
To add a MAC filter:
1. Click Add. A dialog box similar to the one below appears:
2. Specify the MAC address in the dialog box, then click OK.
3. Repeat these steps for any additional MAC addresses you want to filter.
To delete a filter, select it and click Remove.
To modify a filter, select it and click Edit. The Edit dialog box is similar to the
Add dialog box. When it comes up, simply delete the old address and replace
it with the new one.
IP Filter / MAC Filter Conflict
If there is a conflict between an IP filter and a MAC filter – for example, where
a computer’s IP address is allowed by the IP filter but it’s MAC address is
excluded by the MAC filter – then that computer’s access is blocked.
In other word’s, if either filter blocks a computer, then the computer is blocked,
no matter what the other filter is set to.
cn8000.book Page 28 Tuesday, July 1, 2008 4:18 PM