User manual

4. Administration
23
Network
The Network dialog is used to specify the CN8000's network environment.
Access Ports
If a firewall is being used, the Administrator can specify the port numbers that
the firewall will allow (and set the firewall accordingly). Users must specify
the port number as part of the IP address when they connect to the CN8000. If
an invalid port number (or no port number) is specified, the CN8000 will not
be found. An explanation of the fields is given in the table below:
Note: 1. If there is no firewall (on an Intranet, for example), it doesn’t matter
what these numbers are set to, since they have no effect.
2. The access ports cannot have the same value. You must set a different
value for each one.
Field Explanation
iKVM: This is the port number that must be specified when connecting to
the CN8000 from the stand-alone Windows software program. Valid
entries are from 1024–65535. The default is 9000.
Virtual Media: This is the port number used for data transfer using the CN8000’s
virtual media feature. Valid entries are from 1024–65535. The
default is 9003.
HTTP: The port number for a browser login. Valid entries are from 1–65535.
The default is 80.
HTTPs: The port number for a secure browser login. Valid entries are from
1–65535. The default is 443.
cn8000.book Page 23 Tuesday, July 1, 2008 4:18 PM