User manual

CN8000 User Manual
112
4. Select either Obtain an IP address automatically (DHCP), or Specify an
IP address. If you chose the latter, fill the IP Address, Subnet Mask, and
Gateway fields with the information appropriate to your network.
5. Click Set IP.
6. After the IP address shows up in the Device List, click Exit.
Browser
1. Set your computer's IP address to 192.168.0.XXX
Where XXX represents any number or numbers except 60. (192.168.0.60 is
the default address of the CN8000.)
2. Specify the switch's default IP address (192.168.0.60) in your browser, and
you will be able to connect.
3. Assign a fixed IP address for the CN8000 that is suitable for the network
segment that it resides on.
4. After you log out, reset your computer's IP address to its original value.
AP Windows Client
For computers running Windows, the CN8000's IP address can be determined
with the Windows AP program (see The AP Windows Client, page 73). When
you run the program it searches the network segment for CN8000 devices, and
displays the results in a dialog box similar to the one below:
You can now use this network address, or you can change it by clicking Login,
logging in, clicking Admin Utility, and clicking the Network tab. See Network,
page 79, for details.
cn8000.book Page 112 Tuesday, July 1, 2008 4:18 PM