User manual

Appendix
111
IP Address Determination
If you are an administrator logging in for the first time, you need to access the
CN8000 in order to give it an IP address that users can connect to. There are
three methods to choose from. In each case, your computer must be on the same
network segment as the CN8000.After you have connected and logged in you
can give the CN8000 its fixed network address. (See Network, page 23.)
IP Installer
For computers running Windows, an IP address can be assigned with the IP
Installer utility:
1. Unzip the contents of IPInstaller.zip (found on the Software CD that came
with your CN8000 package) to a directory on your hard drive.
2. Go to the directory that you unzipped the IPInstaller program to and run
IPInstaller.exe. A dialog box similar to the one below appears:
3. Select the CN8000 in the Device List.
Note: 1. If the list is empty, or your device doesn't appear, click
Enumerate to refresh the Device List.
2. If there is more than one device in the list, use the MAC address
to pick the one you want. The CN8000's MAC address is located
on its bottom panel.
cn8000.book Page 111 Tuesday, July 1, 2008 4:18 PM