User manual

Chapter 2. Hardware Setup

Installation

Refer to the installation diagram as you perform the installation steps. The

numbers in the diagrams correspond to the numbers of the steps.

1. Plug the SPHD connector end of the KVM cable provided with this unit

into the CL1000's KVM port.

2. Plug the keyboard, monitor, and mouse connectors of the KVM cable into

their respective ports on the Console Section of the KVM switch.

3. Plug the power cord into the CL1000's power socket and into an AC power

source.

4. Power up your KVM installation.

5. Turn on the power to CL1000.