User manual

- 13 -
Connecting the Cables
1. Plug the cables from the local console devices (mouse,
keyboard, monitor, microphone, speakers) into their ports on
the Console section on the rear of the Local Unit (CE700AL).
2. Plug the appropriate connectors on the USB KVM cable
supplied with this unit into their ports on the KVM section on
the front of the Local Unit (CE700AL).
3. Plug the connectors on the other end of the USB KVM cable
into the appropriate ports on the local computer.
Note: If you are combining the CE700A with a KVM switch,
the other end of the USB KVM cable plugs into the
appropriate ports on the KVM switch.
4. Plug one end of the Cat 5e cable into the CE700AL's Remote
I/O port. Plug the other end of the Cat 5e cable into the I/O
port of the Remote Unit (CE700AR).
5. Plug one of the power adapters (supplied with this package)
into an AC source; plug the adapter's power cable into the
CE700AL's Power Jack
6. Plug the cables from the remote console devices into their
ports on the Console side of the CE700AR.
7. Plug the second power adapter (supplied with this package)
into an AC source; plug the adapter's power cable into the
CE700AR's Power Jack.