User manual

9
Chapter 2
Hardware Setup
Rack Mounting
For convenience and flexibility, the CE250AL and CE250AR can be mounted on
system racks. To rack mount a unit do the following:
1. Unscrew either the two front screws or two rear screws from the bottom
panel.
1. Important safety information regarding the placement of this
device is provided on page iv. Please review it before
proceeding.
2. Make sure that power to all the devices you will be connecting
up have been turned off. You must unplug the power cords of
any computers that have the Keyboard Power On function.
ce250a-2007-04.book Page 9 Tuesday, April 3, 2007 10:20 AM