User manual

Chapter 2. Hardware Setup
11
Installation
Grounding
To prevent damage to your installation it is important that all devices are
properly grounded.
1. Use a grounding wire to ground both units by connecting one end of the
wire to the grounding terminal, and the other end of the wire to a suitable
grounded object.
2. Make sure that the computer that the CE250
AL connects to and the monitor
that the CE250
AR connects to are properly grounded.
3. See the Grounding Information card that came with this package for
proper grounding details.
(Continues on next page.)
STP Cable
(Cat 5 or higher)
up to 150 m