CE700.fm Page 1 Friday, November 10, 2006 1:52 PM AC I R AC I R E M O T E M O T 9V /O E 9V /O E User Manual CE-700 Read this guide thoroughly and follow the installation and operation procedures carefully in order to prevent any damage to the units and/or any devices that connect to them.
CE700.fm Page 2 Friday, November 10, 2006 1:52 PM Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause interference to radio communications.
CE700.fm Page 3 Friday, November 10, 2006 1:52 PM Overview The CE-700 is a USB (Universal Serial Bus) based KVM Extender that allows access to a computer system from a remote USB console (USB keyboard, monitor, and USB mouse).
CE700.
CE700.fm Page 5 Friday, November 10, 2006 1:52 PM System Requirements Consoles A VGA, SVGA, or Multisync monitor capable of the highest resolution that you will be using on any computer in the installation A USB keyboard A USB mouse Note: 1. If you connect a DDC type monitor to the Local Unit, the monitor that connects to the Remote Unit must be able to support the highest video resolution that the DDC monitor can provide. 2.
CE700.fm Page 6 Friday, November 10, 2006 1:52 PM Components The Local Unit (CE-700L) Front View: 2 1 AC I R E M O T 9V /O E 3 6 4 # Description 1 Operating Mode Selection Switch 5 Function Pressing this button toggles between the operating mode choices: Local: only the local console can control the system(s) Auto: both consoles can control the system(s).
CE700.fm Page 7 Friday, November 10, 2006 1:52 PM The Local Unit (CE-700L) Rear View: C P U 1 2 # Description Function 1 USB Port The B Connector of the USB KVM Custom Cable supplied with this package plugs in here. 2 Monitor Port The HDB-15 video connector of the USB KVM Custom Cable supplied with this package plugs in here. Note: If you are combining the CE-700 with a KVM switch, the KVM cable connects back to the respective ports on the Console section of the switch.
CE700.fm Page 8 Friday, November 10, 2006 1:52 PM The Remote Unit (CE-700R) Front View: 1 AC I R E M O T 9V /O E 2 5 3 # 4 Description Function 1 LEDs The Remote Unit has two LEDs (Power and On Line) to indicate the operating status of the Local and Remote units (see CE-700R (Remote Unit), p. 11). 2 USB Keyboard The remote USB keyboard and USB mouse plug into and Mouse Ports these connectors. 3 Monitor Port The remote monitor plugs into this connector.
CE700.fm Page 9 Friday, November 10, 2006 1:52 PM Installation Setting up the CE-700 KVM Extender system is simply a matter of plugging in the cables. Refer to the installation diagram on the following page and do the following: 1. Make sure that all the equipment to be connected up is powered Off. 2. Plug the cables from the local console devices (mouse, keyboard, monitor), into their ports on the Console side of the Local Unit (CE-700L). 3.
CE700.
CE700.
CE700.fm Page 12 Friday, November 10, 2006 1:52 PM Troubleshooting Problem Action No video Make sure that all cables are securely plugged into their sockets. Poor video quality. The video quality can be improved by reducing the refresh rate.
CE700.
CE700.fm Page 14 Friday, November 10, 2006 1:52 PM Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM THE DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK OR ITS DOCUMENTATION.
