User manual

- 13 -
Using Gain Controls
After installing the CE-252R/L, you can adjust the strength of
the video signal (Gain).
There are two available Gain controls: Automatic and Manual.
Select the Automatic Gain slide switch on the Remote Unit to let
CE-252R/L adjust the video signal strength. Otherwise, to adjust
the gain manually, select the Manual Gain slide switch, then turn
the Video Gain Control knob left or right.
Accessing Local Computers
The Local/Auto button located on the Local Unit allows users to
restrict the access to the KVM switch connected to it.
Pushing the Local button will block access from the remote
console to the local computers (only the Local Console has
access). Selecting Auto will allow access from both consoles
(Local and Remote Consoles).
n Scan Interval
1 3 secs
2 5 secs
3 10 secs
4 20 secs
CE252.fm Page 13 Friday, September 15, 2006 12:08 PM