User manual

- 10 -
5. Connect the remote console devices (mouse, keyboard and
monitor) to the ports on the rear of the Remote Unit (CE-
252R).
6. Plug the provided KVM cable into the appropriate connector
on the front of the CE-252R, then plug the connectors on the
other end of the KVM cable into the appropriate ports on the
computer system (or Console section of the KVM switch - if
you are using one).
Each connector is marked with an identifying icon.
7. Connect the other provided power adapter into an AC source,
then connect the adapter's power cable to the Power Jack on
the CE-252R.
Installation Diagram
Local Front View
Remote Front View
2
Local Rear View
3
4
1
1
Power
adapter
cable
Remote Rear View
7
5
5
KVM
cable
6
Cat. 5
cable
Local PC
Remote P
C
CE252.fm Page 10 Friday, September 15, 2006 12:08 PM