User manual

- 4 -
Components
The Local Unit (CE-220L)
Front View:
# Description Function
1 Operating
Mode Selection
Switch
Pressing this button toggles between the operating
mode choices:
 Local: only the local console can control the system(s)
 Auto: both consoles can control the system(s).
2 LEDs The Local Unit has two LEDs to indicate the operating
status of the Local and Remote units (see CE-220L
(Local Unit), p. 9).
3 Mouse Port The local PS/2 mouse plugs into this connector.
4 Keyboard Port The local PS/2 keyboard plugs into this connector.
5 Monitor Port The local monitor plugs into this connector.
6 Remote I/O The Cat 5 twisted pair cable that connects to the Remote
Unit plugs into this connector.
7 Range Switch Slide the switch to the Long position if the Remote Unit
is located a long distance away (greater than 30m); slide
the switch to the short position if the Remote Unit is a
short distance away.
8 Power Jack The cable from the AC Power Adapter plugs into this
jack.
1
2
3
4
5
6
7
8
CONSOLE
REMOTE I
/O
LONG SHORT
RANGE
AC 9V
CE220.fm Page 4 Wednesday, November 22, 2006 10:55 AM