User manual

Chapter 10. System Management

Authentication

 Disable Local Authentication

Selecting this option disables login authentication on the Video Session

Recorder. The server can only be accessed using LDAP, LDAPS, MS

Active Directory, or RADIUS authentication.

 RADIUS Settings

To allow authentication and authorization for the Video Session Recorder

through a RADIUS server, do the following:

1. Check Enable.

2. Fill in the IP addresses and service port numbers for the Preferred and

Alternate RADIUS servers. You can use the IPv4 address, the IPv6

address or the domain name in the IP fields.

3. In the Timeout field, set the time in seconds that the Video Session

Recorder waits for a RADIUS server reply before it times out.

4. In the Retries field, set the number of allowed RADIUS retries.

5. In the Shared Secret field, key in the character string that you want to

use for authentication between the Video Session Recorder and the

RADIUS Server. A minimum of 6 characters is required.