User manual

CCVSR User Manual

4. Key in the email address of where the report is being sent from in the

From field.

Note: 1. Only one email address is allowed in the From field, and it

cannot exceed 64 Bytes.

2. 1 Byte = 1 English alphanumeric character.

5. Key in the email address (addresses) of where you want the SMTP

reports sent to in the To field.

Note: If you are sending the report to more than one email address,

separate the addresses with a semicolon. The total cannot exceed

256 Bytes.

 SNMP Server

To be notified of SNMP trap events, do the following:

1. Check Enable SNMP Agent.

2. Key in either the IPv4 address, IPv6 address, or domain name of the

computer to be notified of SNMP trap events.

3. Key in the port number. The valid port range is 1–65535.

Note: The logs that are notified of SNMP trap events are configured on the

Notification Settings page under the Log tab. See Notification

Settings, page 65 for details.

 Syslog Server

To record all the events that take place on the Video Session Recorder and

write them to a Syslog server, do the following:

1. Check Enable.

2. Key in either the IPv4 address, IPv6 address, or domain name of the

Syslog server.

3. Key in the port number. The valid port range is 1-65535.