User manual

CCVSR User Manual
60
Configuring KVM Ports
To enable a KVM Port, so that the Video Session Recorder records it when
accessed through the switch, do the following:
1. In the sidebar Devices list, click the KVM device name.
2. The KVM’s Devices Settings page appears:
3. Enable the ports that you want the Video Session Recorder to record by
checking the boxes. Video Logs will be created every time the enabled
ports are accessed through the KVM switch.
4. After configuring the KVM’s Device Settings, click Save.
A description of the Device Settings fields are given in the table below.
Field Explanation
Type Describes the switch device type for your reference.
Name Provides the name of the KVM switch for your reference.
Description Enter information about the KVM device that you want to include.
IP Enter the IP address of the KVM switch here.
Service Port Enter the service port number of the KVM switch here.
Enable/Disable Checking a box enables the port, so that when it is accessed through
the KVM switch, a video log is recorded.
If a port or device’s checkbox is not selected, it is disabled, and no
video logs will be recorded for that port.
You can enable all ports by selecting the KVM Device’s checkbox, or
individual ports by selecting each port you want to enable.