User manual

Chapter 8. Device Management

Adding KVM Devices

To add a KVM switch to the KVM Device list, do the following:

1. From the Device Management page, click Add.

A pop-up window appears:

2. Fill in the IP address and Service Port number of the KVM switch you are

adding, and click Add.

3. The KVM switch will appear in the Devices list on the sidebar, and on the

Device Management main page.

Note: 1. After adding a KVM switch check to be sure the Status column of the

KVM device is Online.

2. An Offline status indicates the KVM device can’t be reached over the

network. Check that the IP address and Service Port numbers are

correct, and that the KVM switch is online.

Enabling KVM Devices

To enable the KVM switch to record video sessions, do the following:

1. In the sidebar Devices list, click the KVM device name.

2. Under Enable/Disable put a check in the Device box.

3. The KVM switch will now record video sessions anytime a port on the

KVM switch is accessed. To enable/disable individual ports, see

Configuring KVM Ports on the next page.