User manual

CCVSR User Manual
48
group’s device access rights by selecting the Devices tab – the Devices
page is discussed on page 54, or you can assign VSR configuration rights
by selecting the System tab – the System page is discussed on page 56.
5. When your selections have been made click Save.
6. When the Operation Succeeded message appears, click OK.
7. Click Group in the Sidebar to return to the main screen. The new group
appears in the Sidebar Group list and in the main panel.
 The Sidebar Group list can expand and collapse. If the list is expanded,
click the minus symbol ( – ) next to the Users icon to collapse it; if it is
collapsed there is a plus symbol ( + ) next to the icon. Click the plus
symbol to expand it.
 The large main panel shows the group’s name, and the description that
was given when the group was created (the Status column is inactive).
Note: You must perform Step 7 before attempting to add a new group, or else
the new group you are creating will replace the group you just finished
creating.
Modifying Groups
To modify a group, do the following:
1. In the Sidebar Group list, click the group’s name.
– or –
In the main panel, select the group’s name.
2. Click Modify.
3. Click OK.
4. In the Group notebook that comes up, make your changes, then click Save.
Note: The Group page is discussed on page 47; the Members page is
discussed on page 52, The Devices page is discussed on page 54, and
the System page is discussed on page 56.