User manual

CCVSR User Manual
16
Service Ports
As a security measure, if a firewall is being used, the Administrator can specify
the port numbers that the firewall will allow. If a port other than the default is
used, users must specify the port number as part of the IP address when they
log in. If an invalid port number (or no port number) is specified, the Video
Session Recorder will not be found. An explanation of the fields is given in the
table below:
For Example: To access a Video Session Recorder with an IP address of
192.168.0.100, using a secure browser login (https), enter:
https://192.168.0.100:9443
Note: 1. Valid entries for all of the Service Ports are from 1–65535.
2. Service ports cannot have the same value. You must set a different
value for each one.
3. If there is no firewall (on an Intranet, for example), it doesn’t matter
what these numbers are set to, since they have no effect.
Archive Server
If you have installed a VSR Archive Server, input the IP Address and Port
number of the computer hosting the software. For more information on
configuring the Archive Server see VSR Archive Server, page 19, for details.
Disable Keystroke Recording
If you put a check in this box the Video Session Recorder will not record the
keystrokes that occur on a computer during video sessions that are recorded
(see page 41 for details).
Field Explanation
Program This is the port number to configure on a Secondary
Server to connect to a Primary Server hosting the Video
Session Recorder (see page 15 for details).
The default is 9002.
HTTP The port number for a browser login.
The default is 9080.
HTTPS The port number for a secure browser login.
The default is 9443.