User manual

F5 SKP

This function enables you to easily skip backward or forward - switching the

KVM focus from the currently active computer port to the previous or next

available one.

! The selection of computers to be available for Skip Mode switching is

made with the Scan/Skip Mode setting under the F3 SET function

(see p. 35).

! When you are in Skip Mode, press:

←

To skip from the current port to the previous port in the List.

→

To skip from the current port to the next port in the List.

↑

To skip from the current port to the last port of the previous

station in the List.

↓

To skip from the current port to the first port of the next

station in the List.

Note: When you Skip, you only Skip to the previous or next available

computer that is in the Scan/Skip Mode selection

(see p. 35).

! If a Port has been selected for Scan/Skip Mode, when the focus switches to

that port a Left/Right Triangle symbol appears before its Port ID Display

to indicate so.

! While Skip Mode is in effect, the console will not function normally. You

must exit Skip Mode in order to regain control of the console.

! To exit Skip Mode, press [Spacebar] or [Esc].

2005-11-04

KL1116 User Manual