User manual

Port Selection

The KL1116 provides three port selection methods to access the computers

on the installation: Manual; OSD (On Screen Display) menus, and Hotkey.

OSD Operation is discussed in the next chapter; Hotkey Port Selection is

discussed detail in Chapter 5.

Manual Port Switching

! Press a switch to bring the KVM focus to the computer attached to its

corresponding port.

! Press buttons 1 & 2 simultaneously for two seconds to perform a keyboard

and mouse reset.

! Press buttons 7 & 8 simultaneously for two seconds to invoke Auto Scan

Mode (see p. 47).

2005-11-04

Chapter 3 - Basic Operation