User manual

Chapter 1.
Introduction
Overview
The KL1116 KVM Switch is a control unit that allows access to multiple
computers from a single KVM (keyboard, monitor, and mouse), console.
Before the development of the Master View, the only way to control multiple
computer configurations from a single console was through a complex and
costly network system. Now, with the KL1116, you can easily access
multiple computers in a cost effective manner.
A single KL1116 can control up to 16 computers. As many as 31 additional
units can be daisy chained to each other, so that up to 512 (KL1116 +
KH0116) computers can all be controlled from a single
keyboard-monitor-mouse console.
The KL1116 offers a space-saving, streamlined approach to KVM switch
technology by integrating a keyboard, LCD monitor, and touchpad in a
Hideaway™ housing. The LCD display is built into the cover; the keyboard
and touchpad are built into the base. Slide the LCD and keyboard modules
out; flip the cover up; and you are ready to go to work. When finished, flip
the cover down and slide the modules away. The LCD module and keyboard
module slide separately - you can see the video display, for example, while
the keyboard and touchpad are conveniently out of the way.
For further convenience, the Hideaway™ housing is slightly less than 1U
high for easy installation and manipulation in a 1U rack. The KL1116 also
features high density 15 pin connectors instead of the usual 25 pin
connectors. This space-saving innovation allows a full, 16 port switch to be
installed in a 1U system rack. Because of its modular design, the KVM
section can be detached from the switch section.
Your KL1116 investment is protected by an included Firmware Upgrade
Utility. You can stay current with the latest functionality improvements by
downloading firmware update files from our website as they become
2005-11-04
1