User manual

Installation

Refer to the example installation diagram on the next page as

you perform the following steps:

1. Plug the keyboard, monitor, and mouse connectors of the

KVM Connector cable provided with this unit into the

appropriate Console ports of the CS-1200L. Each port is

color coded and labeled with an icon to identify itself.

2. Plug the keyboard, monitor, and mouse connectors of the

KVM Connector cable into their respective ports on the

Console Section of the KVM switch.

3. Plug the power cord into the CS-1200L’s power socket and

into an AC power source.

4. Power up your KVM installation.

5. Turn on the power to CS-1200L.

Note: The example diagram shows the CS-1200L connecting

to an ACS-1216A KVM switch. If you are connecting to a

different model, the console port connectors may be in a

different location.

- 6 -

Before you begin, make sure that power to all the

devices you will be connecting up have been

turned off. You must unplug the power cords of

any computers that have the Keyboard Power On

function.

2. To prevent damage to your installation, make

sure that all devices are properly grounded.

2003-07-31