User Manual CS-1200L Read this guide thoroughly and follow the installation and operation procedures carefully in order to prevent any damage to the units and/or any devices that connect to them. This package contains: M M M M M 1 1 1 1 1 CS-1200L Slideaway Console KVM Connector Cable AC Power Cord Rack Mounting Kit User Manual If anything is damaged or missing, contact your dealer. © Copyright 2003 ATEN® International Co., Ltd. Manual Part No.
Warning! This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Overview The CS-1200L is a KVM console module featuring an integrated 15" LCD panel, full keyboard, and touchpad in a 1U, rack-mountable, Slideaway housing. It was developed in response to the enormous popularity of the Slideaway console found on the ACS-1208AL and ACS-1216AL KVM switches. The ACS-1208AL/ACS-1216AL is made up of two major modules: the front-end Slideaway KVM Console module, and the back-end KVM Switch module.
Features M KVM console (15" LCD display - 88-key keyboard touchpad) in an integrated 1U rack-mountable Slideaway housing M Protects former Master View KVM switch investment M Enjoy the space-saving, efficiency benefits of the ACS-1208AL/ACS-1216AL’s 1U rack-mountable Slideaway console without the expense of its KVM switch module M Keyboard/Touchpad section is easily removed for quick repair or replacement M Sleep mode when the Slideaway cover is closed M Superior video quality - supports resolutions of u
Front View 1 2 3 8 7 6 4 5 1. Handle Pull to slide the KVM module out; push to slide the module in. 2. LCD Monitor After sliding the KVM module out, flip up the cover to access the LCD monitor, keyboard and touchpad. 3. Keyboard 4. Power LED Lights BLUE to indicate that the unit is receiving power.
5. Slide Release There is a mechanism that locks the Slideaway console in the “In” position to prevent it from accidentally sliding out. To slide the the console out, you must first release it by moving this tab sideways. 6. Rack Mounting Brackets There are rack mounting brackets to secure the chassis to a system rack located at each corner of the unit. See p. 10 for rack mounting details. 7. Touchpad 8.
Rear View 1 3 2 4 1. Cable Tie Slot If you want to use a cable tie to gather the cables together, you can run it through this slot to attach it to the unit. 2. Console Port Section The KVM Connector cable that links the CS-1200L to your KVM switch plugs in here. Each port is color coded and labeled with an icon to identify itself. 3. Power Socket The power cord to the AC source plugs in here. 4. Power Switch This is a standard rocker switch that powers the unit On and Off.
Installation 1. Before you begin, make sure that power to all the devices you will be connecting up have been turned off. You must unplug the power cords of any computers that have the Keyboard Power On function. 2. To prevent damage to your installation, make sure that all devices are properly grounded. Refer to the example installation diagram on the next page as you perform the following steps: 1.
2 1 3 -7- 2003-07-31
LCD OSD Configuration The LCD OSD allows you to set up and configure the LCD display: M To bring up the LCD OSD main menu, press the button marked Menu. M Use the ▲ and ▼ buttons to navigate and make adjustments with; after navigating to a setting choice, use the Menu button to bring up the adjustment screen. M When making adjustments, ▲ increases the value; ▼ decreases the value. M When you are satisfied with your adjustment, press Exit to return to the OSD main menu.
Removing the Keyboard and Touchpad The keyboard and touchpad can be easily removed for repair or replacement: 1. Remove the two attaching screws. 2. Locate the opening toward the front and center of the the unit’s bottom panel. The bottom of the keyboard and touchpad module is visible through the opening. 3. Push up on the bottom of the keyboard and touchpad module until it releases from the chassis. 4. Lift the module clear and unplug the cables.
Rack Mounting The CS-1200L can be mounted in a 1U system rack. For convenience and flexibility, a rack mounting kit that allows several mounting options is provided with your CS-1200L package. The various options are explained in the sections that follow. Standard Rack Mounting The standard rack mounting brackets that come attached to the CS-1200L allow the unit to be installed in standard 1U racks. If the unit can fit into your rack “as is,” simply slide it into the rack and screw it securely in place.
Optional Rack Mounting If there is not enough clearance for the unit to slide into the rack when the rear flanges face outward, the problem can be resolved with the following procedure: 1. Unscrew the rear mounting brackets from the chassis. 2. Turn the brackets so that the flanges face inward; then screw them back into the chassis. Note: Be sure to leave a 13mm gap between the flange and the rear of the chassis in order to have enough room to screw the tab to the flange (see step 4).
3. Slide the unit into the rack. 4. Screw the metal tabs to the rear flanges. 5. Secure the unit to the rack with the front flanges and rear tabs.
Specifications Function Connectors Specification Keyboard 1 x 6 pin mini-DIN female Mouse 1 x 6 pin mini-DIN female Video 1 x HDB-15 male Power 1 x AC Input socket LEDs 1 x Power (Blue) Resolution 1024 x 768; DDC2B Environment Operating Temperature: 0 - 50o C Storage Temperature: -20 - 60o C Humidity: 0 - 80% RH Noncondensing Housing Metal Weight 12.2 Kg Dimensions (L x W x H) 59.59 x 48.28 x 4.
Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM THE DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK OR ITS DOCUMENTATION. The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the contents or use of this documentation, and specially disclaims its quality, performance, merchantability, or fitness for any particular purpose.
