Switch User Manual

CS1782 User Manual
20
Restore Default Settings
To reset the CS1782 to its default hotkey settings, do the following:
1. Invoke HSM (see page 14).
2. Press [R] [Enter].
All hotkey settings return to the factory default settings.
Display Emulation Technology
To invoke Display Emulation Technology so the CS1782 reads and remembers
the brand and display information of the monitor attached to the corresponding
port, do the following:
1. Invoke HSM (see page 14)
2. Press [D]
Alternative Manual Port Selection Settings
To toggle between the default and the alternative front panel pushbutton
manual port selection settings, do the following:
1. Invoke HSM (see page 14)
2. Press [S]
See Alternative Manual Port Selection Settings, page 10, for full details of the
alternative front panel pushbutton manual port selection settings.
Mouse Emulation Control
To toggle between mouse emulation enabled and disabled, do the following:
1. Invoke HSM (see page 14
).
2. Press [M].
Other OS Mode
To reset keyboards and mice under some special OS that do not support USB
2.0, do the following:
1. Invoke HSM (see page 14).
2. Press [F1].
cs1782.book Page 20 Thursday, June 12, 2008 2:28 PM