User's Manual

CN8600 User Manual

 Timeout - Sets the amount of time (in minutes) that a remote computer

must wait before attempting to login again after it has exceeded the

number of allowed failures. The default is 3 minutes.

Note: If you don’t enable Login Failures, users can attempt to log in an

unlimited number of times with no restrictions. For security purposes,

we recommend that you enable this function and enable the lockout

policies.

Filter

IP and MAC Filters control access to the CN8600 based on the IP and/or MAC

addresses of the computers attempting to connect. A maximum of 100 IP filters

and 100 MAC filters are allowed. If any filters have been configured, they

appear in the IP Filter and/or MAC Filter list boxes.

To enable IP and/or MAC filtering, put a check mark in the IP Filter Enable

and/or MAC Filter Enable checkbox.

 If the Include button is checked, all the addresses within the filter range

are allowed access; all other addresses are denied access.

 If the Exclude button is checked, all the addresses within the filter range

are denied access; all other addresses are allowed access.