User's Manual

CN8600 User Manual

Rack / Wall Mounting

The CN8600 can be installed in most standard 19" (1U) racks or mounted to a

wall. To rack mount the unit or attach the unit to the wall, do the following:

1. Use the screws supplied with your rack mounting kit to attach the

mounting brackets to each side of the device:

2. If rack mounting, position the device in the rack and align the holes in the

mounting brackets with the hole in the rack. If wall mounting, position the

unit to a desired position on the wall.

3. Screw the mounting brackets to the rack or to a wall.

Note: Cage nuts are provided for racks that are not prethreaded.

Phillips screw head

M3 x 2

Rack Mounting

Wall Mounting