User Guide

Note: The telephone and telephone cord are not included.
Make Calls
Before making a call, make sure at least one of the signal
strength indicator bars ( ) is lit up. If no signal bars are lit,
move the V810 to a location that can receive a signal.
Pick up the handle of your telephone then dial the number
to use call services.
Using a Text Telephone
To use the V810 with TTY, you must first change the TTY
mode from the default (None) to one of the following
modes. From the connected telephone dial pad, dial
“##56*n#” where “n” indicates the TTY mode:
0 – None (TTY) is disabled
1 – Full TTY Mode
2 – VCO mode
3 – HCO mode
Online Device Management Portal
You can access your V810 Online Portal to view device
status, change your device settings, and perform manual
software upgrades.
1. First connect your V810 to a computer with a USB-C
cable and then enter http://192.168.0.1 in the browser
URL address bar.
2. The login username is “admin”. The unique password
can be found on the device label (under the battery
holder).
Online Device Management Portal
From the HOME menu, you can view your device
information and network status. Go to the ABOUT menu to
check for remote software upgrades.