User Guide

ManualsBrandsATEL ManualsOtherATEL V810V Axis 4G LTE Home Phone Connect

Quick Start Guide

Version 12.5

About your V810:

Device Display

Models Covered:

V810 by ATEL

4G LTE Cat-4 Home Phone Connect

POTS Replacement

LCD Display

Displays Home and

Device Information

display screen.

Battery Port

This battery port is used

to connect to the battery

holder (3x AA batteries) or

a Ni-MH rechargeable

battery pack (sold

separately).

Power Button

Power the V810 on/off by

pressing and holding this

button. You can also

short press this button to

wake up the screen and

toggle screens to check

device information

Reset Button

Use a pin to push and

hold this button for 3

seconds for factory reset.

Model

LTE

Bands

810T

2/4/5/12/66/71

810V

2/4/5/12/13/66/71

Summary of content (5 pages)

PAGE 1
Quick Start Guide V810 by ATEL About your V810: Device Display 1. LCD Display Displays Home and Device Information display screen. 2. Power Button Power the V810 on/off by pressing and holding this button. You can also short press this button to wake up the screen and toggle screens to check device information 4G LTE Cat-4 Home Phone Connect POTS Replacement Models Covered: Model V810T V810V LTE Bands B2/4/5/12/66/71 B2/4/5/12/13/66/71 Version 12.5 3.
PAGE 2
5. SIM Card Slot Insert your 4FF SIM card into this spring-loaded SIM slot. To remove a SIM, press the edge of the SIM inward and the SIM would pop outward from the SIM slot. 6. Type-C Port Use this port to connect the USB-C cable to a wall adapter for external power. Connect to your computer using a USB-C cable for Online Portal access. 7. 8. Phone Port (RJ11) Insert a telephone cord to this port and plug the other end into your telephone base.
PAGE 3
Equipment External Power LCD Display Icons Overview: To connect your V810 to the power outlet, insert your USB cable to the device USB-C port and plug the other end into a wall adapter. WARNING! Please only use the provided USB adapter for the V810. The use of other incompatible adapters may cause damage to your device and void the warranty. Turning your V810 On/Off To turn on your V810 press and hold the Power button.
PAGE 4
Online Device Management Portal Note: The telephone and telephone cord are not included. You can access your V810 Online Portal to view device status, change your device settings, and perform manual software upgrades. 1. First connect your V810 to a computer with a USB-C cable and then enter http://192.168.0.1 in the browser URL address bar. 2. The login username is “admin”. The unique password can be found on the device label (under the battery holder).
PAGE 5
Regulatory Statements Please review the Regulatory Statements for this device in the device User Manual, available at www.ATEL-USA.com. Voice/Emergency calls: ATEL cannot guarantee the voice or E911 calls availability. Making a successful call depends on your hardware (telephone) availability, physical location, wireless signal strength, and/or network services. You should never rely solely on any wireless mobile device for essential communications (medical emergencies, for example).