User Guide

Changing Your Online Portal Login Password
You can change the Online Portal login password by going
to Settings > Device Settings > Admin Password. Once
changed, you must use the new password to login to the
portal.
Managing Wi-Fi Networks and Connections
In the Wi-Fi Settings tab, you can change the Wi-Fi name
(SSID) and password. You can also set the device to be
working on the 2.4GHz or 5GHz of the 802.11 mode.
The default maximum Wi-Fi connections is 15, you can set
any value between 1 and 15.
Factory Resetting of Your V810A
You can reset your V810A to factory default from the
Online Portal or reset button.
Note: Resetting your V810A will disconnect devices and
reset network names and passwords.
1. To reset the device from the Online Portal, click
About > Backup and Restore > Restore to Factory
Defaults. Clock on “Restore Factory Defaults” to
restore.
2. To reset the device from the reset button, make sure
your V810A is powered on. Remove the battery cover
from the back of your V810A. Insert a pin into the
Reset pin hole, push down and hold for 3 seconds.
The device will restore the factory defaults and
reboot.