User Guide

Note: During a power outage or if the wall charger is
unplugged, the V810A continues to run off of the batteries
to support data functions.
Equipment External Power
To connect your V810A to the power outlet, insert your
USB cable to the device USB-C port and plug the other
end into a wall adapter.
WARNING! Please only use the provided USB adapter for
the V810A. The use of other incompatible adapters may
cause damage to your device and void the warranty.
Turning your V810A On/Off
To turn on your V810A press and hold the Power button.
To turn off your V810A, press and hold the Power button
until you see the screen turn of.
Optional Add-On’s: Install an Antenna
To increase signal strength, you can install an optional
antenna.
1. Align the antenna with the antenna port and screw
securely into place (in a clockwise direction).
2. Restart the V810A after the antenna is installed.
Note: Antenna may be sold separately. Using optional
accessories (antenna and battery pack) by ATEL are
recommended, available at ATEL website, https://www.atel-
usa.com/.
LCD Display Icons Overview: