Quick Start Guide About your V810A: Device Display 6 V810A 1 by ATEL Models Covered: LTE Bands B2/4/5/12/13/14/66/71 Version 13.2 2 7 8 3 4 5 1. LCD Display Displays Home, Device Information, Hotspot login information, and Online Portal login information. 3. Battery Port This battery port is used to connect to a Ni-MH rechargeable battery pack (may be sold separately). 2. Power Button Power the V810A on/off by pressing and holding this button.
Setting up your V810A Install SIM Card 5. SIM Card Slot Insert your 4FF SIM card into this spring-loaded SIM slot. To remove a SIM, press the edge of the SIM inward and the SIM would pop outward from the SIM slot. 6. Type-C Port Use this port to connect the USB-C cable to a wall adapter for external power. 7. 8. Ethernet Port (RJ45) Insert an ethernet cable to this Port and plug the other end into your computer for internet access.
Note: During a power outage or if the wall charger is unplugged, the V810A continues to run off of the batteries to support data functions. Equipment External Power To connect your V810A to the power outlet, insert your USB cable to the device USB-C port and plug the other end into a wall adapter. Optional Add-On’s: Install an Antenna To increase signal strength, you can install an optional antenna. 1. Align the antenna with the antenna port and screw securely into place (in a clockwise direction). 2.
Connect your Computer to the V810A Using the Ethernet Port The V810A provides 1 Ethernet port (RJ45). For internet access, plug an ethernet cable to the Ethernet port of your V810A and connect it to the Ethernet port of your computer. Device Display Device Label Model: V810A IMEI: XXXXXXXXXXXXXXX SKU: 800964010 Online Portal http://192.168.0.1 User Name: admin SSID: V810_XXXX Password: 123456 WIFI Password: 123456 FCC ID: XYO-V810 Made in China Note: the computer and ethernet cable are not included.
Changing Your Online Portal Login Password The default maximum Wi-Fi connections is 15, you can set any value between 1 and 15. You can change the Online Portal login password by going to Settings > Device Settings > Admin Password. Once changed, you must use the new password to login to the portal. Factory Resetting of Your V810A You can reset your V810A to factory default from the Online Portal or reset button. Note: Resetting your V810A will disconnect devices and reset network names and passwords. 1.
Regulatory Statements Please review the Regulatory Statements for this device in the device User Manual, available at www.ATEL-USA.com. Voice/Emergency calls: ATEL cannot guarantee the voice or E911 calls availability. Making a successful call depends on your hardware (telephone) availability, physical location, wireless signal strength, and/or network services. You should never rely solely on any wireless mobile device for essential communications (medical emergencies, for example).
