User Guide

Installation Completion
Once the installation is complete and the ODU CPE is
connected to your Computer/PC using the PoE injector. You
can now access data services on that Computer/PC. Make sure
all LEDs are lit up on the ODU.
Your installation should resemble the images below.
Changing Your Online Portal Login
Password
You can change the Online Portal login password by going
to Settings > Basic > Management > UI Access Settings.
Once changed, you must use the new password to login to
the portal.
Online Device Management Portal
You can access your ODU J-Series Online Portal to view
device status, change your device settings, and perform
manual software upgrades (for more details, kindly refer to
the device’s User Manual).
Open any web browser and then enter
http://192.168.0.1 in
the URL address bar while connected to the J-Series ODU.
Make sure you are connected directly with the PoE
connection or with some network device, such as a WiFi
router/switch.
The default login username & password is ”admin”.
J-Series ODU
LTE Cell Tower
PoE Injector