User Guide

1. Place the ODU outside and facing an open area towards an
eNodeB/ Cell Tower. Obstructions such as concrete walls,
glass partitions or wooden walls affect the transmission and
reception of network signals.
2. Keep the ODU away from household electrical appliances
that produce strong electric or magnetic fields such as dish
satellite antennas.
Note: Tools required during installation: M6 Wrench and #2 Phillips
Screwdriver (tools not included in installation kit).
Installation of your J-Series ODU
To Mount on a Pole
1. Attach the mounting bracket to the rear panel of the
ODU using four M6 mounting nuts.
2. Attach the U-shaped side of the bracket to the pole
using the provided U bolt clamps.
U-Bolts Clamps
Mounting Bracket
#2 Phillips
Head Screw
M6 Nut Head