User Guide

Package Contents
• J-Series ODU Unit
• Installation Kit
Mounting Bracket
#2 Phillips Head Screws x4
U-Bolt Clamp Set 2 with M6 Nuts x4
Tools not Provided
• POE Injector x1 (110-240V)
• POE Power Cord x1
• Quick Start Guide
Device Ports & LED Interface
Table 1. Port & LED Definitions
1
Ethernet RJ45 Port
Receive Power &
connect with your
computer over
Ethernet via PoE.
5
PWR (Power)
Power LED. LED On
indicates the device
is turned on. LED Off
indicates that the
device is powered off.
2
Reset Button
Pressing this button
helps device
configurations convert
to factory defaults.
6
ETH (Ethernet)
Ethernet LED. LED On
indicates the
Ethernet/LAN
connection is
established. LED Off
indicates the
Ethernet/LAN
connection is not
established.
3
SIM Slot
Regular (2FF) SIM card
needs to be inserted
as directed.
4
RF
Network Signal Bars.
These LEDs indicate
the receiving signal
quality. More LED bars
represents better
signal.
7
SIM
SIM Card LED. LED
On indicates the SIM
card is inserted and
can be detected. LED
Off indicates no SIM
is detected.
Note:
• Use only the provided accessories as mentioned above.
• If you find anything missing from Package contents as listed
above, kindly contact ATEL at [e-mail].