- Atek Electronics Secure Password Organizer User's Manual

Logio User’s Manual, page 26
Pushing will allow you to try to enter and confirm the master passcode again.
If you want to start over with a new master passcode, push and the screen will
display:
And then several seconds later it will display:
At this point you can start the master passcode changing process again by pushing
, or you can skip this setup option and go to the next one by pushing
. If you go through the process again and successfully confirm the new master
passcode, or if you skip changing this setup option, the next screen will display:
And then several seconds later it will display:
Push if you want to skip to the next setup option (change user IDs 1, 2, and 3).
If you push , the screen will display your current lost & found information with
the cursor flashing on the first character of line 1, or the title “Name:” will flash if you
have not set up your name. After editing line 1 or leaving it as is, push or
to go to line 2 (telephone). Edit line 2 or leave it as it is, then push or . The
next screen will display:
Changing Setup Options