User`s manual

Operating and Safety Instructions
17
9. MAINTENANCE
9.1. PERIODIC CHECKS AND MAINTENANCE AT THE END OF THE WORKING DAY
9.1.1. Unplug the machine first.
9.1.2. Remove all burr, foreign materials from the machine’s surface. Use protective eye
glasses.
9.1.3. Clean and dry the machine table.
9.1.4. When cleaning the machine, don’t use any materials which could cause
damage to the machine’s paint.
10. INFORMATION ABOUT FAULTY USE
10.1.1. Check the plug for power supply.
10.1.2. Keep the button pressed for continuous turning of the router bit until the end of
the operation.
10.1.3. This machine is used for opening of slots, channels in various dimensions onto
PVC, aluminum profiles and wooden materials.
11. ELECTRIC COMPONENTS
ORDER NO. PART NAME QUANTITY
550-014 MOTOR 1200W 230V 50 Hz 1
165-019 PUSH BUTTON DD22 TS 1
164-015 3x1 PRINTED PLUG 1
165-019 CONNECTOR 1 NO TRIPLE 1