User`s manual

Operating and Safety Instructions
16
8. CHANGING THE ROUTER BIT
8.1.1 If it becomes necessary to replace the router bit for any reason, follow the
following order for replacement:
8.1.2. Unplug the machine
8.1.3. Loosen the nut shown in Figure 4, No. 52 and 51, using 2 wrench keys 14 and 17
mm, turning it in counter clockwise direction. Take out the router bit from its holder.
Insert the new router bit into the router bit holder, and tighten the nut.
NOTE: Ensure that the router bit is fixed properly.
8.1.4. Check the router bit before using it. The router bit has to be inserted into the holder
properly. Don't use damaged router bits with improper function. Operate the machine
for at least 30 seconds to be sure that the router bit has been inserted and fixed
correctly.
Figure-4
CAUTION !