User`s manual

Operating and Safety Instructions
14
5.2. ELECTRIC CONNECTION
5.2.1 The electric cable socket has to be in accordance with the socket on the
machine.
5.2.2 Your machine has to be used with 230V 50Hz voltage.
5.2.3 Use the machine’s plug with a grounded socket.
5.2.4 . Check the supply voltage. The source voltage must be in accordance with the
data on the machine’s label.
6. MACHINE’S SAFETY INFORMATION
6.1.1. The machine should not be used without the transparent protection shield in front
of the router bit.
6.1.2. Lifting, installation, electric maintenance of the machine should be carried out by
qualified personnel only.
6.1.3. Routine maintenance and scheduled maintenance should be carried out by
qualified personnel after unplugging the machine first.
6.1.4. Ensure that the machine has been cleaned, tested and maintained before
starting to operate it.
6.1.5. Check the safety devices, power cable and moving parts regularly. Don’t
operate the machine before having replaced defective safety devices or faulty parts.
6.1.6. Never replace the router bit before unplugging the machine first.
6.1.7. Keep foreign materials away from the working area of the machine, keep away
from the machine’s moving parts.
The safety data have been defined above. In order to prevent physical damage or
damage to the equipment, please read the safety information carefully and keep the
manual always in an easy accessible place.
CAUTION !
IMPORTANT