User`s manual

Operating and Safety Instructions
12
3.3.7. Use correct illumination for the safety of the operator. (ISO 8995-89 The
Lighting of Indoor Work Systems)
3.3.8. Don't leave anything on the machine.
3.3.9. Don’t use any materials other than those recommended by the
manufacturer for cutting operations on the machine.
3.3.10. Ensure that the work piece is clamped appropriately by the machine's
clamp or vice.
3.3.11. Ensure safe working position, always keep your balance.
3.3.12. Keep your machine always clean for safe operation. Follow the instructions
at maintenance and replacement of accessories. Check the plug and cable
regularly. If damaged, let it replace by a qualified electrician. Keep handles and
grips free of any oil and grease.
3.3.13. Unplug first, before conducting and maintenance works.
3.3.14. Ensure that any keys or adjustment tools have been removed before
operating the machine.
3.3.15. If you are required to operate the machine outside, use only appropriate
extension cables.
3.3.16. Repairs should be carried out by qualified technicians only. Otherwise,
accidents may occur.
3.3.17. Before starting a new operation, check the appropriate function of
protective devices and tools, ensure that they work properly. All conditions have
to be fulfilled in order to ensure proper operation of your machine. Damaged
protective parts and equipment have to be replaced or repaired properly (by the
manufacturer or dealer).
3.3.18. Don’t use machines with improper functioning buttons and switches.
3.3.19. Don’t keep flammable, combustive liquids and materials next to the machine
and electric connections.