System information

Option Value/Example Notes
parkedcallhangup caller Controls which side of a call has the ability to execute a DTMF-based
hangup in the call that results from picking up a parked call. Valid options
include callee, caller, both, or no. The default is no.
parkedcallrecording caller Controls which side of a call has the ability to initiate a DTMF-based one-
touch recording in the call that results from picking up a parked call.
Valid options include callee, caller, both, or no. The default is no.
parkeddynamic yes Enables the dynamic creation of parking lots in the dialplan. The channel
variables PARKINGDYNAMIC, PARKINGDYNCONTEXT, and PAR
KINGDYNPOS need to be set.
adsipark yes Passes ADSI information regarding the parked call back to the originating
set.
findslot next Configures the parking slot selection behavior. See ??? for more details.
parkedmusicclass default Specifies the class to be used for the music on hold played to a parked
caller. A music class set in the dialplan using the CHANNEL(musi
cclass) dialplan function will override this setting.
transferdigittimeout 3 Sets the number of seconds to wait for each digit from the caller executing
a transfer.
xfersound beep Specifies the sound to be played to indicate that an attended transfer is
complete.
xferfailsound beeperr Specifies the sound to be played to indicate that an attended transfer
has failed to complete.
pickupexten *8 Configures the extension used for call pickup.
pickupsound beep Specifies the sound to be played to indicate a successful call pickup
attempt. No sound is played by default.
pickupfailsound beeperr Specifies the sound to be played to indicate a failed call pickup attempt.
No sound is played by default.
featuredigittimeout 1000 Sets the number of milliseconds to wait in between digits pressed during
a bridged call when matching against DTMF activated call features.
atxfernoanswertimeout 15 Configures the number of seconds to wait for the target of an attended
transfer to answer before considering the attempt timed out.
atxferdropcall no Configures behavior of attended transfer call handling when the trans-
ferer hangs up before the transfer is complete and the transfer fails. By
default, this option is set to no and a call will be originated to attempt
to connect the transferee back to the caller that initiated the transfer. If
set to yes, the call will be dropped after the transfer fails.
atxferloopdelay 10 Sets the number of seconds to wait in between callback retries if atx
ferdropcall is set to no.
atxfercallbackretries 2 Sets the number of callback attempts to make if atxferdropcall is
set to no. By default, this is set to 2 callback attempts.
a
Read that again. It makes sense.
features.conf | 223