T-Carrier Analyzer T-BERD 209A/211
Introduction RELIABLE. RUGGED. EASY TO USE. F or over a decade, telecom technicians have depended on the T-BERD 209A/211 T-Carrier Analyzer’s no-nonsense approach to T1 testing. The T-BERD 209A/211 is one of the most widely used solutions for the spectrum of T1 troubleshooting and analysis needs. The reason is clear. TTC packs this user-friendly instrument with a robust feature set and backs it with a promise of customer care excellence. Sometimes it makes sense to follow the crowd.
Features I nformation technicians need to ensure optimum T1 performance is readily obtained, quantified, and qualified by the T-BERD 209A/211’s comprehensive testing and reporting options.
Features B8ZS Detection CSU/NIU Emulation • Quickly identify B8ZS encoded data via front panel indicator Performance Monitor NIU • SMARTNIU mode queries the Performance Monitor portion of combined NIU/Performance Monitor equipment for the recorded T1 span statistics, sets the Performance Monitor NIU clock to match the T-BERD 209A/211’s, and clears NIU performance results • Isolate customer premises and network equipment during installation and maintenance FT1 Analysis • Perform bit error rate tests on se
T-BERD 209A/211 Pattern Selection Frame/Mode Selection Line Code Timing Source Test Time Print Event Criteria Print Error Insert T1 Reference
Restart Alarm Indicators Yellow Alarm Signal Loss All Ones Pattern Loss Pulse Shape Frame Loss Jitter/Low Battery Ones Density Power Loss Excess Zeros Status Indicators T1 Pulses T1C Pulses Pattern Synchronization Frame Synchronization B8ZS History Indicators Loop Codes Receive Send Transmit Output Receive Input Termination T-BERD 209A/211 Dual Results Display
Applications T he T-BERD 209A/211 is a complete test and measurement solution for technicians who install, test, monitor, and maintain T1 links and equipment.
hen you buy a TTC product, you get more than a world-class test instrument – you get world-class services, too. Warranty and Instrument Service TTC service excellence starts with a three-year warranty on all mainframes. You can extend your warranty with our product maintenance agreements, which include plans for service and calibration. Normal service turnaround is five business days, or expedited service is available for even faster turnaround.
Specifications Specifications Input and Output Connectors Bantam, WECO 310, 15-pin D, BNC Input Impedance Bridge: ≥1000 ohms with ALBO Term: 100 ohms with ALBO DSX-MON: 100 ohms with AGC Receive Level Bridge or Term: +6 dBdsx to -35 dBdsx (T1), +3 dBdsx to -6 dBdsx (T1C) DSX-MON: +6 dBdsx to -24 dBdsx (T1), +3 dBdsx to -24 dBdsx (T1C) Level Measurement +6 dBdsx to -40 dBdsx; +6 to -6, 0.1 dB resolution; -6 to -40, 0.
U.S. Headquarters Germantown, Maryland, USA U.S. Offices Atlanta, GA; Chicago, IL; Dallas, TX; Denver, CO; East Rutherford, NJ; Los Angeles, CA; Roanoke, VA; San Jose, CA Worldwide Offices Australia, Benelux, Canada, China, France, Germany, Hong Kong, United Kingdom TTC Products Are Year 2000 Compliant Behind Successful Networks You’ll Find TTC 20400 Observation Drive, Germantown, Maryland 20876 Tel. (800) 638-2049 • (301) 353-1550 (MD) FAX (301) 353-0234 • www.ttc.
