User guide

ManualsBrandsAtec ManualsEquipmentTektronix-THS730A

THS730A.

Features

Handheld Battery Operated

Oscilloscope/DMM/Power

Analyzers

TekScope® THS730A * THS720A *

THS720P

CHARACTERISTICS

Oscilloscope Functions

Channels - Two.

Sensitivity - 5 mV to 50 V/div (to 500 V/div with

10X probe).

Position Range - ±10 div.

DC Gain Accuracy - ±2%.

Vertical Resolution - 8-Bits.

Record Length - 2500 points.

Time/Division Range (THS720P only) - 5 ns to

50 s/div.

Horizontal Accuracy - ±200 ppm.

Roll Mode - > 0.5 s/div.

Autorange - User-selectable.

Trigger Modes - Auto, Normal.

Trigger Types - Edge, Pulse, Video, External, Motor

(THS720P).

Video Trigger Formats and Field Rates - Odd field,

even field and line.

Motor Trigger (THS720P only) - Triggers on 3- and

5-level pulse-width modulated power signal.

External Trigger Input - 5 MHz TTL compatible.

Harmonics (THS720P only) - Up to 31st (30 Hz-

450 Hz).

Waveform Processing - Add, Subtract, Multiply,

Calculate Watts = V x I.

Waveform Storage - 10 waveforms.

THS730A THS720A THS720P

Bandwidth 200 MHz 100 MHz 100 MHz

Sample Rate (Each

Channel)

1 GS/s 500 MS/s 500 MS/s

Time/Division Range 2 ns to 50

s/div

5 ns to

50s/div

5 ns to

50s/div

Power Measurements N N Y

Summary of content (3 pages)

PAGE 1
Handheld Battery Operated Oscilloscope/DMM/Power Analyzers TekScope® THS730A * THS720A * THS720P CHARACTERISTICS Oscilloscope Functions THS730A. Features Bandwidth Sample Rate (Each Channel) Time/Division Range Power Measurements THS730A 200 MHz 1 GS/s THS720A 100 MHz 500 MS/s THS720P 100 MHz 500 MS/s 2 ns to 50 s/div N 5 ns to 50s/div N 5 ns to 50s/div Y Oscilloscope Functions Channels - Two. Sensitivity - 5 mV to 50 V/div (to 500 V/div with 10X probe). Position Range - ±10 div.
PAGE 2
Acquisition Modes - Sample, Envelope, Average, Peak Detect. Cursor Measurements - delta Volts, delta Time, 1/deltaTime (Hz), Degree (phase). Cursor Types - Horizontal Bars, Vertical Bars, Paired (volts @ time). Display System - Interpolation: Sin(x)/x. Format: YT and XY. Mode: Vector, Dot, Vector Accumulate, Dot Accumulate.
PAGE 3
Diode Test Range - 0 to 2 V. Continuity Check - Audible tone when < 50 Ohm. Modes - Min, Max, Delta, Max-Min, Avg, Hold. Nonvolatile Storage - 10 DMM screenshots. External Trigger Input - 5 MHz TTL compatible. Vertical Zoom Capability - 2X, 5X, 10X. dB Scale - Selectable, referenced from 1 mV to 10 V. dBm Scale - Selectable, referenced from 50 Ohm to 600 Ohm. General Specifications Setups - 10 front-panel setups. Safety - UL3111-1, CSA1010.1, EN61010-1, IEC61010.1. EMC - Meets Directive 89/336/EEC.