Variable Transformers Series 6000 l 35.0 to 315.
5000/6000 Series Manual Single, Uncased Two Ganged 17.06” [433.3] 13.56” [344.4] 15.12” [384.2] A B C Three Ganged 23.12” [587.4] 19.62” [498.3] 21.19” [538.2] Manual Two and Three-Ganged, Uncased Manual Single, Cased Manual Two-Ganged, Cased A B Single Unit 12.94” [328.6] 15.50” [393.7] Two Ganged 19.18” [487.3] 21.56” [547.6] Motor Driven, Single and Two-Ganged, Cased Single Unit Two Ganged A 13.25” [336.6] 19.32” [490.7] B 9.75” [247.7] 15.82” [401.8] C (5 sec.) 13.53” [343.7] 19.62” [498.
5000/6000 Series A 3 Ganged 35.8” [909.32] 4, 5, 6 Ganged 54.8” [1391.9] 7, 8, 9 Ganged 72.8” [1849.1] Manual Three to Nine-Ganged, Cased 4 Ganged A B 30.38” [771.5] 27.38” [695.3] 5 Ganged 36.44” [925.5] 33.44” [849.3] 6 Ganged 42.50” [1079.5] 39.50” [1003.3] 7 Ganged 48.56” [1233.5] 45.56” [1157.3] 8 Ganged 54.62” [1387.5] 51.62” [1311.3] 9 Ganged 60.69” [1541.5] 57.69” [1465.3] Manual Four to Nine-Ganged, Uncased A 3 Ganged 33.5” [850.9] 4, 5, 6 Ganged 52.5” [1333.
5000/6000 Series A B 12 Ganged 15 Ganged 18 Ganged 21 Ganged 24 Ganged 27 Ganged 36.31” [922.3] 42.38” [1076.4] 48.44” [1230.3] 54.50” [1384.3] 60.56” [1538.3] 66.62” [1692.3] 30.94” [786.8] 37.00” [939.8] 43.06” [1093.8] 49.12” [1247.8] 55.19” [1401.8] 61.25” [1555.8] Motor-Driven 12, 15, 18, 21, 24 & 27-Ganged, Uncased A 12, 15, 18 Ganged 52.5” [1333.5] 21, 24, 27 Ganged 70.5” [1790.7] Motor-Driven 12, 15, 18, 21, 24 & 27-Ganged, Cased A B 10 Ganged 12 Ganged 14 Ganged 42.38” [1076.3] 48.
6000 Series Variable transformers of the 6011/6020 Series are designed for larger KVA requirements. The 6011, 120 volt unit is rated for constant current of 60 amperes. The 6020, 240 volt unit is rated at 35 amperes for constant current loads. All single units have coil tapping arrangements allowing output voltage from 0 to line voltage or 17% above line voltage. Adjustable shaft design on manually operated models permits back-of-panel or bench mounting. Terminals are 1/4” screw type.
000 Series VIEW FROM ROTOR END For opposite rotation interchange external connections from 5 to 1, 2 to 4 and 6 to 7.
6000 Series PART NUMBER INPUT OUTPUT MAX AMPS MAX KVA SHAFT ROTATION FOR VOLTAGE INCREASE 43.6 50.9 21.8‡ 0-120 0-140 0-240 0-280 0-280 105 105 105*-45 V. D. 210 210 210*-90 V. D. 105 105 105*-45 V. D. 70 70 70*-30 V. D. 420 420 245 245 245*-105 V. D.
6000 Series PART NUMBER INPUT OUTPUT WIRING MANUALLY OPERATED MOTOR DRIVEN — M6020-10PS M6020E-10PS — — — M6011-12D M6011E-12D M6011-12PS M6011E-12PS M6020-12D M6020E-12D — M6020-12PS M6020E-12PS — M6011-14D M6011E-14D — — — — — — — — — — — — M6011-14PS M6011E-14PS M6020-14D M6020E-14D M6020-14PS M6020E-14PS M6011-16D M6011E-16D M6011-16PS M6011E-16PS M6020-16D M6020E-16D M6020-16PS M6020E-16PS M6011-18D M6011E-18D M6011-18PS M6011E-18PS M6020-18D M6020E-18D M6020-18PS M6020E-18PS
6000 Series PART NUMBER INPUT OUTPUT MAX AMPS MAX KVA SHAFT ROTATION FOR VOLTAGE INCREASE 140 140 140*-60 V. D. 300 300 175 175 175*-75 V. D. 360 360 210 210 210*-90 V. D. 420 420 245 245 245*-105 V. D. 480 480 280 280 280*-120 V. D. 540 116.3 135.
