Fast and accurate cleanliness testing.
Specialty Coating Systems’ name is synonymous in the industry with automated ROSE (Resistivity of Solvent Extract) testing systems. SCS Ionograph® ionic contamination test systems utilize the dynamic extraction method to measure resistivity change when a substrate is submerged in the ultra-pure test solution. The degree of change in resistivity indicates the level of contamination, which is often the result of residues from fabrication and board assembly processes.
Ionograph® 500M SP Ionograph® 500M STD Ionograph® 500M LP SCS Ionograph 500M Benchtop Models SCS also offers convenient benchtop Ionographs for the quick and accurate testing of individual parts, complete assemblies or small devices. The units enable users to match the test cell size with common substrate sizes to provide enhanced testing accuracy. The Windows®-based program establishes contamination testing parameters and calibrates equipment for consistent, repeatable and accurate measurements.
Ionograph Specifications Characteristic Test Cell Size Solution Capacity Dimensions (W x D x H) Weight (dry) Power Requirements Maximum Operating Temp. 500M SP Test Module 500M STD Test Module 500M LP Test Module SMD II Module* SMD IV Module** 18 x 20 in / 45.7 x 50.8 cm 20 x 26 in / 50.8 x 66 cm 26 x 30 in / 66 x 76.2 cm 26 x 38 in / 66 x 96.5 cm 18 x 20 in / 45.7 x 50.8 cm 20 x 26 in / 50.8 x 66 cm 6 x 6 in / 15.2 x 15.2 cm 12 x 14 in / 30.5 x 35.5 cm 14 x 20 in / 35.3 x 50.8 cm 7 - 17.
