Manual

MODEL 5263
0.7 - 4.2 GHz
60 WATTS
LINEAR POWER RF AMPLIFIER
5300 Beethoven Street, Los Angeles, CA 90066
TEL: [phone] FAX: [phone]
WEB: www.ophirrf.com E-MAIL: [e-mail]
Parameter Specification @ 25° C
Electrical
1 Frequency Range 0.7 – 4.2 GHz
2 Saturated Output Power 60 Watts Typical
3 Power Output @ 1dB Comp. 40 Watts Minimum
4 Small Signal Gain +49 dB min
5 Small Signal Gain Flatness + 3.0 dB max
6 IP
3
+56 dBm typical
7 Input VSWR 2:1 max
8 Harmonics -20 dBc typical @ 45 Watts
9 Spurious Signals < -60 dBc typical @ 45 Watts
10 Input/Output Impedance 50 Ohms nominal
11 AC Input Power 1000 Watts max
12 AC Input 100 – 240 VAC, single phase
13 RF Input +10 dBm max
14 RF Input Signal Format CW/AM/FM/PM/Pulse
15 Class of Operation A
Mechanical
16 Dimensions 19” x 5.25” x 20”
17 Weight 43 Lbs
18 Connectors Type-N
19 Grounding Chassis
20 Cooling Internal Forced Air
Environmental
21 Operating Temperature 0º C to +50º C
22 Operating Humidity 95% Non-condensing
23 Operating Altitude Up to 10,000’ Above Sea Level
24 Shock and Vibration Normal Truck Transport
Solid State
Broadband High
Power RF Amplifier
The 5263 is a 60 Watt
broadband amplifier that
covers the 0.7 – 4.2 GHz
frequency range. This small
and lightweight amplifier
utilizes Class A linear power
devices that provide an
excellent 3
rd
order intercept
point, high gain, and a wide
dynamic range.
Due to robust engineering
and employment of the most
advanced devices and
components, this amplifier
achieves high efficiency
operation with pr oven
reliability. Like all OPHIR
RF
amplifiers, the 5263 comes
with an extended multiyear
warranty.
Specifications subject to change without notice
08/12
Approved By: ________________________________________________ Date: _____________________
◊ RE
-
Rear RF Connector model with Front Panel
Controller Ethernet, IEEE-488 and RS232
◊ FE
-
Front RF Connector model with Front Panel
Controller Ethernet, IEEE-488 and RS232
◊ R
-
Rear RF Connector model
◊ F
-
Front RF Connector model
ORDERING MODELS
FE Model Shown