User guide

600V
CAT III
Designed and
Conforms to
IEC 1010-1
Fluke. Keeping your world
up and running.
C0174UEN 5/98 Rev A
For current measurement on large and difficult
to reach conductors
Ordering Information
Fluke i2000flex Current Probe
Need Technical Assistance? Call:
1-800-44-FLUKE
Toll-free in the U.S.
[phone] in Canada
[phone] other countries
For more information to be sent
to you by fax, call 1-800-FLUKE-FAX
in the U.S. and Canada. Or, visit our
Website at http://www.fluke.com
The i2000flex is a flexible, ac current
probe for oscilloscopes and digital
multimeters recommended for current
measurement on large and difficult
to reach conductors.
•
Maximum current measurement rating
is 2000A ac
•
Switchable between 200A and 2000A
•
Includes a 62 cm (24.4") circumfer-
ence flexible probe with a connector
for coupling and decoupling around
a conductor
•
Includes BNC connector, making it
suitable for use with any oscilloscope,
power analyzer or ScopeMeter
®
®
test
tool having a compatible BNC input
connector
•
Dual banana to BNC adapter is
included for use with DMMs
•
CAT III 600V
•
The output signal is 10 mV/A in the
200A range and 1 mV/A in the 2000A
range
•
9V alkaline battery, installed
•
At least 100 hour battery life
•
One year warranty
•
UL approval is pending
i2000flex Current Probe
POWER ON
2000
A
1
mV/A
200
A
10
mV/A
OFF
FLEXIBLE
AC CURRENT PROBE
BATTERY LOW
i2000
FLEX
INPUT AND
OUTPUT