5502A Multi-Product Calibrator Robust, transportable solution to match your workload and budget
5502A features at a glance • Calibrates a wide variety of electrical test equipment • Robust protection circuits prevent costly damage from operator error • Ergonomically designed carrying handles make the 5502A easy to transport • Rugged carrying case with built-in handles and wheels and removable front/rear access doors for in-situ calibration in almost any environment • Current output that extends to 120 A when paired with the 52120A Transconductance Amplifier • Remarkably affordable
Practical solutions for calibrating in the lab or in the field A full-functioned calibrator that covers a wide range of common workload The 5502A Multi-Product Calibrator addresses common workload items like 3.5 and 4.5 digit digital multimeters and more. It comes with internal and external protection features that enable you to transport it easily and perform on-site or mobile calibration. The 5502A can also be fully automated with MET/CAL® Plus Calibration Management Software.
Overview Internal circuitry protects against user error Reverse power protection, check before connect, immediate output disconnection, and fuse protection on the output terminals offers “mistake proof” protection against common user errors. This protection is for applied external voltages up to ± 300 V peak. Control output by pressing STBY and OPR keys.
Automation, training and support Time comparison for manual and automated calibration methods Minutes to calibrate More than 35 Verification Tests More than 30 Verification Tests 45 40 Manual Cal with only pass/ fail data 35 30 Added time for Manual Cal with verified test data 25 20 15 Automated Cal w/verified test data 10 5 0 Automate with MET/CAL® Plus software for consistent and efficient calibration g Di 5 5. to M M 5 4. c h D ) n 5 Be e 4 k lu (F it t MM gi D i ld D 5 e 3.
Summary specifications Function and range Direct volts 0 to ± 1020 V Direct current 0 to ± 20.5 A Alternating volts 1 mV to 1020 V 10 Hz to 500 kHz Volt/hertz 1000 V@ 10 kHz/330 V@100 kHz Alternating current 29 µA to 20.5 A 10 Hz to 30 kHz Waveforms Sine, square, triangle, truncated sine Resistance 0 Ω to 1100 MΩ Capacitance 220 pF to 110 mF Power (phantom loads) 20.9 kW Phase control 0.
Multi-product calibrator family 5522A Multi-Product Calibrator Robust, transportable wide workload coverage The 5522A Multi-Product Calibrator is the most accurate model in this calibrator family. It calibrates digital multimeters into the 5.5 and 6.5 digit category. The 5522A addresses the widest calibration workload with optional power quality capabilities and oscilloscope calibration for scopes with bandwidths to 1100 MHz.
Ordering Information Model 5502A 5502A/3 5502A/6 Accessories 52120A 5522A/ CARRYCASE 55XX/CASE 5500A/ LEADS 5500A/COIL 9100-200 5500A/HNDL Y5537 Software MET/CAL MET/TEAM Multi-Product Calibrator Multi-Product Calibrator with 300 MHz Oscilloscope Calibration Option Multi-Product Calibrator with 600 MHz Oscilloscope Calibration Option The broadest range of calibration solutions Fluke Calibration provides the broadest range of calibrators and standards, software, service, support and training in electric
