Manual

ManualsBrandsAtec ManualsEquipmentFluke-5500A

5500A

Multi-Product

Calibrator

Extended Specifications

2005

Summary of content (27 pages)

PAGE 1
5500A Multi-Product Calibrator Extended Specifications 2005
PAGE 2
5500A Specifications The following paragraphs detail specifications for the 5500A Calibrator. The specifications are valid after allowing a warm-up period of 30 minutes, or twice the time the 5500A has been turned off. For example, if the 5500A has been turned off for 5 minutes, the warm-up period is 10 minutes. All specifications apply for the temperature and time period indicated.
PAGE 3
General Specifications Warmup Time Settling Time Standard Interfaces Temperature Performance Twice the time since last warmed up, to a maximum of 30 minutes. Less than 5 seconds for all functions and ranges except as noted. IEEE-488 (GPIB), RS-232, 5725A Amplifier • Operating: 0 °C to 50 °C Temperature Coefficient • Storage: -20 °C to 70 °C Temperature Coefficient for temperatures outside tcal +5 °C is 0.1X/ °C of the 90-day specification (or 1-year, as applicable) per °C.
PAGE 4
Electrical Specifications DC Voltage Specifications Range 0 to 329.9999 mV 0 to 3.299999 V 0 to 32.99999 V 30 to 329.9999 V 100 to 1020.000 V 0 to 329.999 mV 0.33 to 3.3 V Absolute Uncertainty, tcal ± 5 °C ± (% of output + µV) Stability 24 hours, ± 1 °C 90 days 1 year ± (ppm output + µV) 0.005 3 0.006 3 5 ppm + 1 0.004 5 0.005 5 4+3 0.004 50 0.005 50 4 + 30 0.004 500 0.0055 500 4.5 + 300 0.0045 1500 0.0055 1500 4.5 + 900 [2] Auxiliary Output (dual output mode only) 0.03 350 0.04 350 30 + 100 0.03 350 0.
PAGE 5
DC Current Specifications Absolute Uncertainty, tcal ± 5 °C ± (% of output + µA) Range 0 to 3.29999 mA 0 to 32.9999 mA 0 to 329.999 mA 0 to 2.19999 A 0 to 11 A 0 to 11 A 90 days 0.010 0.05 0.008 0.25 0.008 3.3 0.023 44 0.038 330 0.03 330 1 year 0.013 0.05 0.01 0.25 0.01 3.3 0.03 44 0.06 330 5725A Amplifier 0.04 330 Resolution Compliance Voltage Maximum Inductive Load 0.01 µA 0.1 µA 1 µA 10 µA 100 µA 4.5 V 4.5 V [1] 4.5 to 3.0 V [2] 4.5 to 3.4 V [3] 4.5 to 2.
PAGE 6
Resistance Specifications Range Absolute Uncertainty, tcal[2]± 5 °C ± (% of output + Ω) [1] 90 days 0 to 10.99 Ω 11 to 32.999 Ω 33 to 109.999 Ω 110 to 329.999 Ω 330 Ω to 1.09999 kΩ 1.1 to 3.29999 kΩ 3.3 to 10.9999 kΩ 11 to 32.9999 kΩ 33 to 109.999 kΩ 110 to 329.999 kΩ 330 kΩ to 1.09999 MΩ 1.1 to 3.29999 MΩ 3.3 to 10.9999 MΩ 11 to 32.9999 MΩ 33 to 109.999 MΩ 110 to 330 MΩ [1] 0.009 0.009 0.007 0.007 0.007 0.007 0.007 0.007 0.008 0.009 0.011 0.011 0.045 0.075 0.4 0.4 1 year [3] 0.008 [3] 0.015 [3] 0.
PAGE 7
AC Voltage (Sine Wave) Specifications Range 1.0 to 32.999 mV 33 to 329.999 mV 0.33 to 3.29999 V 3.3 to 32.9999 V 33 to 329.
PAGE 8
AC Voltage (Sine Wave) Specifications (cont.) Range 100 to 1020 V 100 to 750 V 10 to 329.999 mV 0.33 to 3.29999 V Absolute Uncertainty, tcal ± 5 °C ± (% of output + µV) 90 days 1 year 5725A Amplifier 45 Hz to 1 kHz 0.04 80 mV 0.05 80 mV 1 to 20 kHz 0.06 100 0.08 100 20 to 30 kHz 0.08 100 0.10 100 30 to 100 kHz 0.38 500 0.5 500 [2] Auxiliary Output [dual output mode only] 10 to 20 Hz 0.15 370 0.2 370 20 to 45 Hz 0.08 370 0.1 370 45 Hz to 1 kHz 0.08 370 0.1 370 1 to 5 kHz 0.15 450 0.2 450 5 to 10 kHz 0.
PAGE 9
AC Voltage (Sine Wave) Specifications (cont.) Range Frequency 1.0 to 32.999 mV 33 to 329.999 mV 0.33 to 3.29999 V 3.3 to 32.9999 V 33 to 329.999 V 330 to 1000 V 100 to 1000 V 100 to 750 V 10 to 329.999 mV 0.33 to 3.29999 V 8 Fluke Corporation Maximum Distortion and Noise 10 Hz to 5 MHz Bandwidth ± (% output + µV) 0.15 % + 90 µV 0.035 + 90 µV 0.06 + 90 µV 0.15 + 90 µV 0.25 + 90 µV 0.3 + 90 µV 0.15 % + 90 µV 0.035 + 90 µV 0.06 + 90 µV 0.15 + 90 µV 0.20 + 90 µV 0.20 + 90 µV 0.15 % + 200 µV 0.
PAGE 10
AC Current (Sine Wave) Specifications Range 0.029 to 0.32999 mA 0.33 to 3.2999 mA 3.3 to 32.999 mA Frequency 10 to 20 Hz 20 to 45 Hz 45 Hz to 1 kHz 1 to 5 kHz 5 to 10 kHz 10 to 20 Hz 20 to 45 Hz 45 Hz to 1 kHz 1 to 5 kHz 5 to 10 kHz 10 to 20 Hz 20 to 45 Hz 45 Hz to 1 kHz 1 to 5 kHz 5 to 10 kHz 33 to 329.99 mA Absolute Uncertainty, tcal ± 5 °C ± (% of output + µA) 90 days 1 year 0.19 0.15 0.25 0.15 0.09 0.15 0.125 0.15 0.09 0.25 0.125 0.25 0.30 0.15 0.4 0.15 0.94 0.15 1.25 0.15 0.15 0.3 0.2 0.3 0.08 0.
PAGE 11
AC Current (Sine Wave) Specifications (cont.) Range Frequency 1.5 to 11 A 45 Hz to 1 kHz 1 to 5 kHz 5 to 10 kHz Resolution Compliance Voltage Max Inductive Load 100 3 400 µH [1] The actual voltage compliance (Vc) is a function of current output (Io), and is given by the formula: Vc = -3.37*Io+3.11. The highest compliance voltage is limited to 3.0 V. [2] The actual voltage compliance (Vc) is a function of current output (Io), and is given by the formula: Vc = -0.535*Io+3.18.
PAGE 12
Capacitance Specifications Range Absolute Uncertainty, tcal ± 5 °C ± (% of output + nF) 90 days 0.33 to 0.4999 nF 0.5 to 1.0999 nF 1.1 to 3.2999 nF 3.3 to 10.999 nF 11 to 32.999 nF 33 to 109.99 nF 110 to 329.99 nF 0.33 to 1.0999 µF 1.1 to 3.2999 µF 3.3 to 10.999 µF 11 to 32.999 µF 33 to 109.99 µF 110 to 329.99 µF 330 to 1.1 mF 0.38 0.38 0.38 0.38 0.19 0.19 0.19 0.19 0.26 0.26 0.30 0.38 0.50 1 0.01 0.01 0.01 0.01 0.1 0.1 0.3 1 3 10 30 100 300 300 Frequency Resolution 1 year 0.5 0.5 0.5 0.5 0.25 0.25 0.
PAGE 13
Temperature Calibration (Thermocouple) Specifications TC [1] Type Range (°C) [2] 600 to 800 800 to 1000 1000 to 1550 1550 to 1820 0 to 150 150 to 650 650 to 1000 1000 to 1800 1800 to 2316 -250 to -100 -100 to -25 -25 to 350 350 to 650 650 to 1000 -210 to -100 -100 to -30 -30 to 150 150 to 760 760 to 1200 -200 to -100 -100 to -25 -25 to 120 120 to 1000 1000 to 1372 B C E J K Absolute Uncertainty Source/Measure,[3] tcal ± 5 °C, ± (°C) 90 days 1 year 0.42 0.44 0.34 0.34 0.30 0.30 0.26 0.33 0.23 0.
PAGE 14
Temperature Calibration (RTD) Specifications RTD Type Pt 395, 100 Ω Pt 3926, 100 Ω Pt 3916, 100 Ω Pt 385, 200 Ω Range [1] °C -200 to -80 -80 to 0 0 to 100 100 to 300 300 to 400 400 to 630 630 to 800 -200 to -80 -80 to 0 0 to 100 100 to 300 300 to 400 400 to 630 -200 to -190 -190 to -80 -80 to 0 0 to 100 100 to 260 260 to 300 300 to 400 400 to 600 600 to 630 Absolute Uncertainty tcal ±5[2]°C ± °C 90 days 1 year 0.04 0.05 0.05 0.05 0.07 0.07 0.08 0.09 0.09 0.10 0.10 0.12 0.21 0.23 0.04 0.05 0.05 0.05 0.
PAGE 15
DC Power Specification Summary Absolute Uncertainty, tcal ± 5 °C, ± (% of Watts output) 5500A Calibrator Current Range 3.3 to 8.999 mA 9 to 32.999 mA 33 to 89.99 mA 90 to 329.99 mA 0.03 0.02 0.03 0.02 0.04 0.03 0.04 0.03 [1] Voltage Range 90 days 1 year 33 mV to 1020 V 33 mV to 1020 V 90 days 1 year Voltage Range 33 mV to 1020 V 33 mV to 1020 V Voltage Range 90 days 1 year [1] 14 33 mV to 1020 V 33 mV to 1020 V 0.33 to 0.8999 A 0.07 0.08 0.9 to 2.1999 A 0.05 0.06 1.5 to 4.4999 A 0.09 0.10 2.
PAGE 16
AC Power (45 Hz to 65 Hz) Specification Summary, PF=1 Absolute Uncertainty, tcal ± 5 °C, ± (% of Watts output) Current Range 3.3 to 8.999 mA 9 to 32.999 mA 33 to 89.99 mA 90 to 329.99 mA 5500A Calibrator 0.30 0.20 0.25 0.20 0.20 0.12 0.20 0.12 0.40 0.25 0.35 0.25 0.25 0.15 0.25 0.15 5725A Amplifier 0.20 0.12 0.20 0.12 0.25 0.15 0.25 0.15 0.33 to 0.8999 A 0.9 to 2.1999 A 2.2 to 4.4999 A 4.5 to 11 A 5500A Calibrator 0.25 0.20 0.25 0.20 0.20 0.12 0.18 0.12 0.35 0.25 0.35 0.25 0.25 0.15 0.20 0.
PAGE 17
Power and Dual Output Limit Specifications Frequency DC 10 to 45 Hz 45 to 65 Hz 65 to 500 Hz 65 to 500 Hz 500 Hz to 1 kHz 1 to 5 kHz 5 to 10 kHz [1] [2] 16 Voltages (NORMAL) 0 to ± 1020 V 33 mV to 32.9999 V 33 mV to 1020 V 330 mV to 1020 V 3.3 V to 1020 V 330 mV to 1020 V [1] 3.3 V to 1020 V [2] 3.3 V to 1020 V Currents 0 to ± 11 A 3.3 mA to 2.19999 A 3.3 mA to 11 A 33 mA to 2.19999 A 33 mA to 11 A 33 mA to 11 A 33 mA to 2.19999 A 33 mA to 329.99 mA Voltages (AUX) 0 to ± 3.3 V 10 mV to 3.3 V 10 mV to 3.
PAGE 18
Phase Specifications 1-Year Absolute Uncertainty, tcal ± 5 °C, ( ∆Φ Degrees) 65 to 500 Hz 500 Hz to 1 kHz 1 to 5 kHz [2] [3] 0.9 ° 2.0 ° 6° 10 to 65 Hz [1] 0.15 ° 5 to 10 kHz 10 ° [1] For 33 to 1000 V output, burden current <6 mA. For 6 to 20 mA burden current (33 to 330 V), the phase uncertainty is 0.4 degree. [2] For 33 to 1000 V output, burden current <2 mA. For 2 to 5 mA burden current (33 to 330 V), the phase uncertainty is 1.5 degrees. [3] For 33 to 1000 V output, burden current <2 mA.
PAGE 19
Calculating Power Uncertainty Overall uncertainty for power output in Watts (or VARs) is based on the root sum square (rss) of the individual uncertainties in percent for the selected voltage, current, and power factor parameters: Watts uncertainty Upower = U2voltage + U2current + U2PFadder VARs uncertainty UVARs = U2 voltage + U2current + U2 VARsadder Because there are an infinite number of combinations, you should calculate the actual ac power uncertainty for your selected parameters.
PAGE 20
Additional Specifications The following paragraphs provide additional specifications for the 5500A Calibrator ac voltage and ac current functions. These specifications are valid after allowing a warm-up period of 30 minutes, or twice the time the 5500A has been turned off. All extended range specifications are based on performing the internal zero-cal function at weekly intervals, or when the ambient temperature changes by more than 5 °C. (See Chapter 4, Front Panel Operations in the 5500A Operator Manual.
PAGE 21
Harmonics (2nd to 50th) Specifications Fundamental [1] Frequency 10 to 45 Hz 45 to 65 Hz 65 to 500 Hz 500 to 1 kHz 1 to 5 kHz Voltages NORMAL Terminals 33 mV to 32.9999 V 33 mV to 1020 V 33 mV to 1020 V 330 mV to 1020 V 3.3 to 1020 V Currents 3.3 mA to 2.19999 A 3.3 mA to 11 A 33 mA to 11 A 33 mA to 11 A 33 mA to 2.19999 A Voltages AUX Terminals 10 mV to 3.3 V 10 mV to 3.3 V 100 mV to 3.3 V 100 mV to 3.3 V 100 mV to 3.
PAGE 22
AC Voltage (Sine Wave) Extended Bandwidth Specifications Range 1.0 to 33 mV 34 to 330 mV 0.4 to 3.3 V 4 to 33 V 0.3 to 3.3 V 10 to 330 mV 0.4 to 3.3 V Frequency 1-Year Absolute Uncertainty, tcal ± 5 °C, ± (% of output + % of range) % Output % Range Normal Channel (Single Output Mode) Maximum Voltage Resolution Two digits, e.g.
PAGE 23
AC Voltage (Non-Sine Wave) Specifications Triangle Wave & Truncated Sine Range [1] p-p 2.9 to 92.999 mV 93 to 929.999 mV 0.93 to 9.29999 V 9.3 to 92.9999 V 93 to 929.999 mV 0.93 to 9.29999 V Maximum Voltage Resolution Two digits on each range Six digits on each range Two digits on each range Six digits on each range [1] To convert p-p to rms for triangle wave, multiply the p-p value by 0.2886751. To convert p-p to rms for truncated sine wave, multiply the p-p value by 0.2165063.
PAGE 24
AC Voltage, DC Offset Specifications [1] Range (Normal Channel) 3.3 to 32.999 mV 33 to 329.999 mV 0.33 to 3.29999 V 3.3 to 32.9999 V 9.3 to 92.999 mV 93 to 929.999 mV 0.93 to 9.29999 V 9.3 to 92.9999 V 6.6 to 65.999 mV 66 to 659.999 mV 0.66 to 6.59999 V 6.6 to 65.
PAGE 25
AC Voltage, Square Wave Characteristics Rise Time @ 1 kHz Typical Settling Time @ 1 kHz Typical Overshoot @ 1 kHz Typical Duty Cycle Range <1 µs <10 µs to 1 % of final value <2 % 1 % to 99 %, <3.3 V p-p, 0.01 Hz to 100 kHz [1] Duty Cycle Uncertainty [1] ± (0.8 % of period +140 ns) for frequencies >10 kHz; + (0.8 % of period + 2 µs) for frequencies ≤10 kHz. For duty cycles of 10.00 % to 90.00 %. AC Voltage, Triangle Wave Characteristics (typical) Linearity to 1 kHz 0.
PAGE 26
AC Current (Non-Sine Wave) Specifications Triangle Wave & Truncated Sine Wave [1] Ranges 2.9 to 92.999 mA 93 to 929.999 mA 0.93 to 2.19 A 2.2 to 11 A 2.9 to 65.999 mA 66 to 659.999 mA 0.66 to 2.19 A 2.2 to 11 A Frequency 0.01 to 10 Hz 10 to 45 Hz 45 Hz to 1 kHz 1 to 10 kHz 0.01 to 10 Hz 10 to 45 Hz 45 Hz to 1 kHz 1 to 10 kHz 10 to 45 Hz 45 Hz to 1 kHz 1 to 5 kHz 45 to 500 Hz 500 Hz to 1 kHz 0.01 to 10 Hz 10 to 45 Hz 45 Hz to 1 kHz 1 to 10 kHz 0.
PAGE 27
Fluke. Keeping your world up and running. MA NAGEMENT Fluke Corporation PO Box 9090, Everett, WA USA 98206 SY AL ST I TY QU EM ® ISO 9001 RT IE 00 1 CE IF D T SO O MEET I 9 Fluke Europe B.V. PO Box 1186, 5602 BD Eindhoven, The Netherlands For more information call: In the U.S.A.